Data Sheets / Brochures

O-Ring IDS-1112 Serial Device Server

View Saved Products
  • High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
  • Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP 
  • Redundant multiple host devices: 
  • 5 host devices: Virtual COM, TCP Server, TCP Client mode; 4 IP ranges: UDP
  • NAT-pass through: user can manage IDS-1112 through NAT router
  • High Security Capability: SSL data encryption; secured management by HTTPS
  • SSH: IP Access: IP White List; wireless: WEP/WP/WPA2/802.1X/TKIP
  • Internet Communication: PPPoE
  • Update DNS Hostname: DDNS
  • Event Warning by Syslog, Email, SNMP trap, and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • OS supported: Windows NT/2000, XP, 2003, VISTA, Windows 7

 

The IDS-1112 is a serial device server with 1 port RS232 to 802.11b/g WLAN, up to 54Mbps, and 2 port LAN device server with all the features of device server. These features include TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP.

Additionally, the Windows utility, DS-Tool, can configure multiple devices and set up the mappings of Virtual Com. The NAT Router Pass Through, DDNS, and PPPoE make for fast and fluid workflow for administrators to configure ORing’s device servers through NAT router from different IP domains or securely via the Internet.

The IDS-1112 serial device server can simultaneously transfer data up to 5 redundant host PCs to avoid Ethernet connection breakdown or if any host PC fails. As well as this the IDS-1112 features HTTPS, SSH, SSL encryption, and 802.1X to ensure the security of all data transmission. 

IDS-1112 supports RS-232 and provides dual redundant power inputs and terminal block to guarantee a non-stop operation.

A wide operating temperature of -10 to 65°C  and rugged IP-30 housing design make the ID-1112 a tough little device. An ideal solution for WLAN data communication.

 

Specification  
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
WLAN Standard IEEE802.11b/g
Operating Mode Client Mode
Antenna and Connector Reverse SMA
Radio Frequency Type DSSS, OFDM
Modulation IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)
Transmission Rate

IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 MbpsIEEE802.11b: 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps

Transmit Power IEEE802.11b/g : 18dBm
Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%;
-64dBm @ 54Mbps, PER< 10%
Encryption Security WEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
WAP-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Connector DB9(male) x 1
Operation Mode RS-232
Serial Baud Rate 110 bps to 230.4 Kbps
Data Bits 5, 6 ,7, 8
Parity Odd, even, none, mark, space
Stop bits 1, 1.5, 2
Rs-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
Power Indicator PWR 1(2) / Ready:
Red On: Power is on and booting up.
Green On: Power is on and functioning Normally.
Green Blinking: Located by Administrator.
10/100Base-T(X) RJ45 Port Indicator Green: Port Link/Act at 100Mbps. Amber: Port Link/Act at 10Mbps.
WLAN Indicator

Green: WLAN Link /ACTWLAN Link /ACT:
Green: WLAN Strength 1<25% , 2<50%, 3<75%, 4<100%

Serial TX / RX LEDs Red: Serial port is receiving data
Green: Serial port is transmitting data
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 5.3 W
Overload Current Protection Yes
Reverse Polarity Protection Yes, on terminal block
Enclosure IP-40
Dimensions (W x D x H) 40 x 115 x 153 mm
Weight 551 g
Storage Temperature -40 to 85°C
Operating Temperature -10 to 60°C
Operating Humidity 5% to 95% Non-condensing
EMI FCC Part 15, CISPR (EN55022) class A
EMS

IEC61000-4-2 (ESD)
IEC61000-4-3 (RS)
IEC61000-4-4 (EFT)
IEC61000-4-5 (Surge) IEC61000-4-6 (CS)
IEC61000-4-8
IEC61000-4-11

Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

 

JEA Technologies

Unit 1, 72 Bayfield Road East,
Bayswater North,
Victoria, 3153,
Australia

PH: +61 3  8736 0330