The IDS-1112 is a serial device server with 1 port RS232 to 802.11b/g WLAN, up to 54Mbps, and 2 port LAN device server with all the features of device server. These features include TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP.
Additionally, the Windows utility, DS-Tool, can configure multiple devices and set up the mappings of Virtual Com. The NAT Router Pass Through, DDNS, and PPPoE make for fast and fluid workflow for administrators to configure ORing’s device servers through NAT router from different IP domains or securely via the Internet.
The IDS-1112 serial device server can simultaneously transfer data up to 5 redundant host PCs to avoid Ethernet connection breakdown or if any host PC fails. As well as this the IDS-1112 features HTTPS, SSH, SSL encryption, and 802.1X to ensure the security of all data transmission.
IDS-1112 supports RS-232 and provides dual redundant power inputs and terminal block to guarantee a non-stop operation.
A wide operating temperature of -10 to 65°C and rugged IP-30 housing design make the ID-1112 a tough little device. An ideal solution for WLAN data communication.
|10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX||1|
|Operating Mode||Client Mode|
|Antenna and Connector||Reverse SMA|
|Radio Frequency Type||DSSS, OFDM|
|Modulation||IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
|Frequency||America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels)
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
|Transmit Power||IEEE802.11b/g : 18dBm|
|Receiver Sensitivity||-81dBm @ 11Mbps, PER< 8%;
-64dBm @ 54Mbps, PER< 10%
|Encryption Security||WEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
WAP-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
|Connector||DB9(male) x 1|
|Serial Baud Rate||110 bps to 230.4 Kbps|
|Data Bits||5, 6 ,7, 8|
|Parity||Odd, even, none, mark, space|
|Stop bits||1, 1.5, 2|
|Rs-232||TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND|
|Flow Control||XON/XOFF, RTS/CTS, DTR/DSR|
|Network Protocols||ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS|
|Power Indicator||PWR 1(2) / Ready:
Red On: Power is on and booting up.
Green On: Power is on and functioning Normally.
Green Blinking: Located by Administrator.
|10/100Base-T(X) RJ45 Port Indicator||Green: Port Link/Act at 100Mbps. Amber: Port Link/Act at 10Mbps.|
Green: WLAN Link /ACTWLAN Link /ACT:
|Serial TX / RX LEDs||Red: Serial port is receiving data
Green: Serial port is transmitting data
|Redundant Input Power||Dual DC inputs. 12-48VDC on 6-pin terminal block|
|Power Consumption (Typ.)||5.3 W|
|Overload Current Protection||Yes|
|Reverse Polarity Protection||Yes, on terminal block|
|Dimensions (W x D x H)||40 x 115 x 153 mm|
|Storage Temperature||-40 to 85°C|
|Operating Temperature||-10 to 60°C|
|Operating Humidity||5% to 95% Non-condensing|
|EMI||FCC Part 15, CISPR (EN55022) class A|
Unit 36, 41-49 Norcal Road,
PH: +61 3 8736 0330