Data Sheets / Brochures

O-Ring IGMC-111GP Industrial Media Converter

View Saved Products

  • Support 1 port 10/100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X copper port
  • Support 1 port 100/1000Base-X SFP fibre port
  • Support Jumbo Frame up to 9K Bytes
  • Support LFP (Link Fault Pass-through) function
  • Relay output to carry capacity of 1A at 24 VDC for warning system
  • Provided DIP-Switch to setting function
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Please provide your first name
You must provide an email address
I am not a robot is required

The IGMC-111GP is a cost-effective solution for a conversion interface between 10/100/1000Base-T(X) and a 100/1000Base-X SFP socket. It allows the user to extend communication distance by super fast optical fibre. The IGMC-111GP supports MDI/MDIX auto detection, therefore crossover wires are not needed.

As well as this LFP (Link Fault Pass-through) is also supported. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

The IGMC-111GP has huge operating temperature range, from -40 ~ 75°C it can handle almost any operating environment. Furthermore it also accepts a wide voltage range from dual 12~48 VDC power inputs.

 

Specification  
10/100/1000 Base-T(X) Port in RJ45 Auto MDI/MDIX 1
100/1000Base-X SFP por 1
Ethernet Standards

IEEE 802.3i for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
Jumbo Frame 9K Bytes (1G mode only)
Power / Ready Indicator Green: Power LED x 2
LFP Statue Indicator Amber: (ON) LFP function fail / (OFF) LFP function disable
100/1000Base-X SFP Port Indicator Green: Port Link / Act
10/100/1000Base-T(X) Port Duplex Mode Indicator Green: (ON) Full-duplex mode / (OFF) Half-Duplex mode
10/100/1000Base-T(X) RJ45 port Indicator

Green:  Link/Act


Dual colour LED for speed:
Green for 1000Mbps
Amber for 100Mbps
Off-light for 10Mbps
Fault Indicator Amber: Indicate unexpected event occurred
Relay Relay output to carry capacity of 1A at 24 VDC
Input Power Dual 12~ 48 VDC voltage power inputs in 4-pin terminal block
Power Consumption (Typ.) 4 W
Overload Current Protection Yes
Reverse Polarity Protection Yes
Enclosure IP-30 Rated
Dimensions (W x D x H) 30 x 70 x 96 mm
Weight 291 g
Storage Temperature -40 to 85°C
Operating Temperature -40 to 75°C
Operating Humidity 5% to 95% Non-condensing
EMI FCC Part 15, CISPR (EN55022) class A
EMS

EN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT) EN61000-4-5 (Surge) EN61000-4-6 (CS) EN61000-4-8
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

 

JEA Technologies

Unit 36, 41-49 Norcal Road,
Nunawading,
Victoria, 3131,
Australia

PH: +61 3  8736 0330