Data Sheets / Brochures

O-Ring ORIO-G30218 Industrial IOT Gateway

View Saved Products
  • 2 Serial Ports for RS232/RS422/4W-RS485/2W-RS485
  • NB-IOT/CAT M1/CAT 1/ZigBee/LoRa (by model)
  • 4 Digital inputs (Dry/Wet) / 4 Digital outputs (Sink)
  • Data Log
  • Supports Modbus protocol
  • Supports MQTT/COAP protocol
  • Configuration via USB virtual com port
  • -40 to 75°C wide operating temperature

The ORIO-G30218 is an IOT device with 4 DIs/4 DOs and a wireless module. The serial port is up to 921.6K baud rate and supports the Modbus protocol. ORIO-G30218 has multi-common protocols that helps the user transmit data to the cloud easily. A user can configure the ORIO-G30218 by using the USB virtual com port as well as update the device's firmware via USB.

Specification  
Serial Port Type DB9
Serial Ports 2
Operation Mode RS232, RS422, 4W-RS485, 2W-RS485
Serial baud Rate Up to 921.6Kbps
Data Bits 5, 6, 7, 8
Parity None, Even, Odd
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, DCD, DTR, DSR, RTC, CTS, GND
RS-422 Tx-, Tx+, Rx+, Rx-, GND
RS-485 4 wire: Tx-, Tx+, Rx+, Rx-, GND
2 wire: Data-, Data+, GND
NB-IOT Frequency Band: B1/B2/B3/B4/B5/B8/B12/B13/B20/B28
Output Power: 23dBm
Sensitivity: -129dBm
AT Command: 3GPP Rel-13 and enhanced AT commands
CAT M1 Frequency Band: B1/B2/B3/B4/B5/B8/B12/B13/B20/B28
AT Command: 3GPP TS27.007, 27.005 and other enhanced AT Commands
CAT 1 Frequency Band: B1/B3/B8/B20/B28
AT Command: Hayes, TS 27.007 and 27.005 and other enhanced AT Commands
ZigBee Frequency : 2400 MHz
Output Power: 7dBm, Max: 21dBm
Sensitivity: Up to -99dBm
Security: 128-bit AES encryption algorithms
LoRa Frequency : 868MHz / 916MHz
Output Power: 7dBm, Max: 21dBm
Sensitivity: Up to -132dBm
Security: 128-bit AES encryption algorithms
USB Port Type Micro USB, Female B type
USB Ports 1
Function Update firmware, Configuration
Sensor Type Wet Contact (NPN or PNP), Dry Contact
I/O Mode DI or Event Counter
Number of Ports 4
Dry Contact On: short to GND
Off: Open
We Contact (DI to COM) On: 10 to 30 VDC
Off: 0 to 3 VDC
Counter Frequency 20 Hz
Digital Filtering Time Interval Software Configurable
Isolation 3K VDC or 2K Vrms
Port Type Sink
Number of Ports 4
I/O Mode DO or Pulse Output
Over-Voltage Protection 60 VDC
Over-Current Protection 2.6 A
Over-Temperature Shutdown Typical: 175°C
Minimum: 150°C
Current Rating 200 mA per channel
Isolation 3K VDC or 2K Vrms
Power LED Green: Power is ready
Off: Power fail
Tx1, Tx2 (Serial TX LED) Green: Serial port is transmitting data (TX)
OFF: Serial port doesn't transmit data (TX)
Rx1, Rx2, (Serial RX LED) Amber: Serial port is receiving data (RX)
OFF: Serial port doesn't receive data (RX)
WireLess (Wireless Signal LED) Green: Wireless is transmitting/receiving data
OFF: Wireless doesn't transmit/receive data
Wireless Strength LED Green: Wireless Strength >= 75%
Amber: Wireless Strength 50 to 75 %
Amber with blink: Wireless Strength 25 to 50 %
OFF: Wireless Strength < 25%
EMC EN 55032/24
EMI CISPR 22, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV
IEC 61000-4-5 Surge Power: 1 kV;
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
Storage Temperature -40 to 85°C
Operating Temperature -40 to 70°C
Operating Humidity 5% to 95% Non-condensing
Warranty 5 years

 

JEA Technologies

Unit 1, 72 Bayfield Road East,
Bayswater North,
Victoria, 3153,
Australia

PH: +61 3  8736 0330