O-Ring TDS-5041-I-M12 Serial Device Server
- Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
- Redundant multiple host devices
- Host devices: Virtual COM, TCP Server, TCP Client mode; 4 IP ranges, UDP
- NAT-pass through: user can manage TDS-5041-I-M12 through NAT router
- SSL data encryption; secured management by HTTPS and SSH: IP Access - IP White List
- Internet Communication: PPPoE
- Update DNS Hostname: DDNS
- Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
- Configurable by Web-based and Windows utility (DS-Tool)
- Supports: Windows NT / 2000 / XP / 2003 / VISTA(32/64bit) / Windows 7(32/64bit) / Windows 8(32/64bit) / Windows 10
TDS-5041-I-M12 is an innovative secure 4-port RS-422/485 to 1 port LAN secure device server. It features TCP/IP and versatile operation modes such as Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP. In addition, the Windows utility, DS-Tool, can configure multiple devices and easily set up the mappings on Virtual Com.
Features including NAT Router Pass Through, DDNS, and PPPoE make it more convenient for administrators to configure O-Ring’s device servers through NAT router from different IP domains or securely via the Internet.
On the other hand, TDS-5041-I-M12 can simultaneously transfer data up to 5 redundant host PCs to avoid Ethernet connection breakdown or any host PC fails. Furthermore, the TDS-5041-I-M12 features HTTPS, SSH, and SSL encryption to assure the security of data transmission.
The TDS-5041-I-M12 supports 4 x RS-422/485 interfaces on 5-pin M12 A-coding connectors and provides one wide range power input, 12~48 VDC, on a 5-pin M12 connector. Alongside this a massive operating temperature of -40~70°C means the TDS-5041-I-M12 can operate in a harsh industrial environment.
| Specification | |
| 10/100 Base-T(X) Ports in M12 Auto MDI/MDIX | 1 (4-pin D-Coding in female connector |
| Connector | M12 x 4 (5-pin A-coding in male connector) |
| Operation Mode | RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool |
| Serial Baud Rate | 110 bps to 460.8 Kbps |
| Data Bits | 5, 6, 7, 8 |
| Parity | odd, even, none, mark, space |
| Stop bits | 1, 1.5, 2 |
| RS-232 | TxD, RxD, GND |
| RS-485 (2-wire) | Data+, Data-, GND |
| Flow Control | XON / XOFF |
| Isolation | 2KVDC |
| Protocol | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, DDNS, PPPoE |
| Power Indicator |
PWR 1(2)(PoE)/ Ready :
Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On: Power is on and functioning Normally. Green Blinking: Located by Administrator. |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act at 100Mbps.
Amber for port Link/Act at 10Mbps. |
| Serial TX / RX LEDs |
Red: Serial port is receiving data
Green: Serial port is transmitting data |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Input Power | Power Inputs. 12-48VDC x 1(5-pin M12 female in A-coding) |
| Power Consumption (Typ.) | 5.5 W |
| Overload Current Protection | Yes |
| Enclosure | IP-40 |
| Dimensions (W x D x H) | 170 x 65 x 195 mm |
| Weight | 950 g |
| Storage Temperature | -40 to 85°C |
| Operating Temperature | -40 to 70°C |
| Operating Humidity | 5% to 95% Non-condensing |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS |
IEC61000-4-2 (ESD)
IEC61000-4-3 (RS) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) IEC61000-4-6 (CS) IEC61000-4-8 IEC61000-4-11 |
| Shock | IEC60068-2-27, EN61373 |
| Free Fall | IEC60068-2-32 |
| Vibration |
IEC60068-2-6
EN61373 |
| Warranty | 5 years |
JEA Technologies
Unit 1, 72 Bayfield Road East,
Bayswater North,
Victoria, 3153,
Australia
PH: +61 3 8736 0330