Home > Products > Industrial Networking > Serial Device Servers > O-Ring IDS-242GT-I+ Serial Device Server
O-Ring IDS-242GT-I+ Serial Device Server

O-Ring IDS-242GT-I+ Serial Device Server

  • Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Modbus Gateway
  • Support Modbus Gateway : Modbus TCP, Modbus RTU, Modbus ASCII
  • 2 x Gigabit Ethernet ports for high speed data transmission
  • Security: SSL data encryption; secured management by HTTPS and SSH
  • 1KV isolation for PoE P.D. port
  • 2KV isolation for serial port
  • Supports 9K Bytes Jumbo Frame
  • Event Warning by Syslog, SNMP trap, Relay and Beeper
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported: Windows NT/2000 / XP / 2003/ VISTA(32/64bit) / Windows 7(32/64bit)

The IDS-242GT-I+ is an innovative secure 4 port RS-422/485 to 2 ports Gigabit Ethernet  device server with excellent features such as TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP.

In addition to this, the Windows utility, DS-Tool, can configure multiple devices and set up the mappings of Virtual Com. The IDS-242GT-I+ also features HTTPS, SSH, and SSL encryption to assure the security of  data transmission.

IDS-242GT-I+ supports RS-422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation.

An enormous operating temperature range of -40 to 70°C and rugged IP-30 housing design ensures the this serial device server will operate smoothly in the harsh industrial environment.

 

IDS-242GT-I+ Brochure
Specification 
10/100/1000 Base-T(X) Ports in RJ45
Auto MDI/MDIX 		2
PoE P.D. port Present at ETH2
Fully compliant with IEEE 802.3af Power Device specification 
Over load & short circuit protection 
Isolation Voltage: 1000 VDC min. 
Isolation Resistance : 108 ohms min
Connector 5 pin terminal block x 4
Operation ModeRS-422/485
Serial Baud Rate110 bps to 921.6 Kbps
Data Bits7, 8
Parityodd, even, none, mark, space
Stop Bits1, 1.5, 2
Rs-422TxD+, TxD-, RxD+, RxD-,GND
RS-485 (4-wire)TxD+, TxD-, RxD+, RxD-,GND
RS-485 (2-wire)DATA+, DATA-, GND
Isolating2KV
Flow ControlXON/XOFF, RTS/CTS, DTR/DSR
Network ProtocolsICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS
Jumbo FrameUp to 9.6K Bytes
Power IndicatorPWR 1(2) / Ready:
Green On: Power is on and functioning Normally.
10/100/1000 RJ45 port indicator Top Indicator:

Green: port Link at 1000Mbps
Amber:port Link at 100Mbps Off: port Link at 10Mbps


Bottom Indicator:

Green: port Link/Act
Serial TX / RX LEDs Red: Serial port is receiving data Green: Serial port is  transmitting data
Redundant Input PowerDual DC inputs. 12-48VDC on 6-pin terminal block
Power consumption (Typ.)6.96 W
Overload current protectionYes
Reverse polarity protectionPresent on terminal block
EnclosureIP-30
Dimensions (W x D x H)54.2 x 106.1 x 145.4 mm
Weight705 g
Storage Temperature-40 to 85°C
Operating Temperature-40 to 70°C
Operating Humidty5% to 95% Non-condensing
EMIFCC Part 15 B, CISPR (EN55032) class A
EMSEN61000-4-2 (ESD)
EN61000-4-3 (RS)
EN61000-4-4 (EFT)
EN61000-4-5 (Surge)
EN61000-4-6 (CS)
EN61000-4-8
EN61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
Warranty5 years