The ORIO-G30218 is an IOT device with 4 DIs/4 DOs and a wireless module. The serial port is up to 921.6K baud rate and supports the Modbus protocol. ORIO-G30218 has multi-common protocols that helps the user transmit data to the cloud easily. A user can configure the ORIO-G30218 by using the USB virtual com port as well as update the device’s firmware via USB.
O-Ring ORIO-G30218 Industrial IOT Gateway
- 2 Serial Ports for RS232/RS422/4W-RS485/2W-RS485
- NB-IOT/CAT M1/CAT 1/ZigBee/LoRa (by model)
- 4 Digital inputs (Dry/Wet) / 4 Digital outputs (Sink)
- Data Log
- Supports Modbus protocol
- Supports MQTT/COAP protocol
- Configuration via USB virtual com port
- -40 to 75°C wide operating temperature
| Specification | |
| Serial Port Type | DB9 |
| Serial Ports | 2 |
| Operation Mode | RS232, RS422, 4W-RS485, 2W-RS485 |
| Serial baud Rate | Up to 921.6Kbps |
| Data Bits | 5, 6, 7, 8 |
| Parity | None, Even, Odd |
| Stop Bits | 1, 1.5, 2 |
| RS-232 | TxD, RxD, DCD, DTR, DSR, RTC, CTS, GND |
| RS-422 | Tx-, Tx+, Rx+, Rx-, GND |
| RS-485 | 4 wire: Tx-, Tx+, Rx+, Rx-, GND 2 wire: Data-, Data+, GND |
| NB-IOT | Frequency Band: B1/B2/B3/B4/B5/B8/B12/B13/B20/B28 Output Power: 23dBm Sensitivity: -129dBm AT Command: 3GPP Rel-13 and enhanced AT commands |
| CAT M1 | Frequency Band: B1/B2/B3/B4/B5/B8/B12/B13/B20/B28 AT Command: 3GPP TS27.007, 27.005 and other enhanced AT Commands |
| CAT 1 | Frequency Band: B1/B3/B8/B20/B28 AT Command: Hayes, TS 27.007 and 27.005 and other enhanced AT Commands |
| ZigBee | Frequency : 2400 MHz Output Power: 7dBm, Max: 21dBm Sensitivity: Up to -99dBm Security: 128-bit AES encryption algorithms |
| LoRa | Frequency : 868MHz / 916MHz Output Power: 7dBm, Max: 21dBm Sensitivity: Up to -132dBm Security: 128-bit AES encryption algorithms |
| USB Port Type | Micro USB, Female B type |
| USB Ports | 1 |
| Function | Update firmware, Configuration |
| Sensor Type | Wet Contact (NPN or PNP), Dry Contact |
| I/O Mode | DI or Event Counter |
| Number of Ports | 4 |
| Dry Contact | On: short to GND Off: Open |
| We Contact (DI to COM) | On: 10 to 30 VDC Off: 0 to 3 VDC |
| Counter Frequency | 20 Hz |
| Digital Filtering Time Interval | Software Configurable |
| Isolation | 3K VDC or 2K Vrms |
| Port Type | Sink |
| Number of Ports | 4 |
| I/O Mode | DO or Pulse Output |
| Over-Voltage Protection | 60 VDC |
| Over-Current Protection | 2.6 A |
| Over-Temperature Shutdown | Typical: 175°C Minimum: 150°C |
| Current Rating | 200 mA per channel |
| Isolation | 3K VDC or 2K Vrms |
| Power LED | Green: Power is ready Off: Power fail |
| Tx1, Tx2 (Serial TX LED) | Green: Serial port is transmitting data (TX) OFF: Serial port doesn't transmit data (TX) |
| Rx1, Rx2, (Serial RX LED) | Amber: Serial port is receiving data (RX) OFF: Serial port doesn't receive data (RX) |
| WireLess (Wireless Signal LED) | Green: Wireless is transmitting/receiving data OFF: Wireless doesn't transmit/receive data |
| Wireless Strength LED | Green: Wireless Strength >= 75% Amber: Wireless Strength 50 to 75 % Amber with blink: Wireless Strength 25 to 50 % OFF: Wireless Strength < 25% |
| EMC | EN 55032/24 |
| EMI | CISPR 22, FCC Part 15B Class B |
| EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV IEC 61000-4-5 Surge Power: 1 kV; IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m |
| Storage Temperature | -40 to 85°C |
| Operating Temperature | -40 to 70°C |
| Operating Humidity | 5% to 95% Non-condensing |
| Warranty | 5 years |